Cement Contractors in Rocklin, California
As one of the many established cement contractors in Rocklin, our company has strived to maintain our position at the slim top through various practices.
CLICK TO CALL (916) 473-4001 We have years of experience, exhausting this area to its fullest and leaving no stone upturned. By venturing deeper into all the possible angles of our specialty, we have embraced creativity as our main door to opening other doors of success. Moreover, we take pride in our work, exploring it whole-hardheartedly. Waking up to a new day is like accepting a new challenge awaiting us to tackle it. This draws the difference between us and other cement contractors based here in Rocklin, CA Whether you need a job for commercial or residential work our company will be able to take care of a lot of your needs. CLICK TO CALL US (916) 473-4001 |
|
cement construction - rocklin, ca
Call (916) 473-4001.
Some of the services we provide involve the building and repairing of:
Below is an insight we’d like to share with you on what we do. The construction of driveways involves the following steps:
Locating the materials to be used.
Locating place for the project. We consider the area chosen for the driveway construction. Using string, we set the layout for the area and estimate the amount of materials and labor needed. We also draw a simple sketch of the area as we look for a suitable drainage system for it.
Excavation Finding a datum, we carry out excavation on the surface to establish the height we need to achieve for the base and the others subsequent layers on top. The bottom of the base must be solid to avoid sinking of the whole driveway or having an irregular surface on top.
The base of the driveway. This stage entails preparation and layout of the base. With the available materials for this project, we begin working on it. Gravel is trimmed to sharp long edged points on its sides and placed upright from the surface of the base. We utilize each space available on the base.
Installing restrainers. Edge restrainers are used to confine the sides of the driveway. This is to avoid the slipping or shift of concrete or brick pavers we may install. Edge restrainers are a key factor in driveway construction.
Laying the fine sand. A sheet of sand is setup on top of the gravel while a compressor is used to keep the platform compact. The compressor exposes places with thin sand and thus more sand is added to those identified spots. The sheet of sand is up-to a specified thickness.
Installing pavers. Either Brick, stone or concrete pavers are installed on your driveways with the required patterns to give your home a new impression. They are set with a plate compactor. Coarse sand is then swept into the joints until they are completely full.
This whole sieved process in meant to give you a hint of what will be going on outside your home. It will also help you keep track of it. Please give us a call via our office line or send us a mail so that we can negotiate on the terms of this project and provide you with the best deal. All this service is provided here in Rocklin, CA. Call (916) 473-4001 for cement contractor.
Some of the services we provide involve the building and repairing of:
- Walkways
- Patios
- Driveways
- Stamped concrete
- Brick pavements
- Concrete pouring
- Basement walls
- Exposed aggregate
- Brick pavers
- Masonry work
- Cement
Below is an insight we’d like to share with you on what we do. The construction of driveways involves the following steps:
Locating the materials to be used.
- Stakes
- Strings
- Measuring tape
- Coarse and fine sand
- Gravel
- Shovel
- Trowel
- Broom
- Scissors
- Bricks or concrete pavers.
- Tamper
Locating place for the project. We consider the area chosen for the driveway construction. Using string, we set the layout for the area and estimate the amount of materials and labor needed. We also draw a simple sketch of the area as we look for a suitable drainage system for it.
Excavation Finding a datum, we carry out excavation on the surface to establish the height we need to achieve for the base and the others subsequent layers on top. The bottom of the base must be solid to avoid sinking of the whole driveway or having an irregular surface on top.
The base of the driveway. This stage entails preparation and layout of the base. With the available materials for this project, we begin working on it. Gravel is trimmed to sharp long edged points on its sides and placed upright from the surface of the base. We utilize each space available on the base.
Installing restrainers. Edge restrainers are used to confine the sides of the driveway. This is to avoid the slipping or shift of concrete or brick pavers we may install. Edge restrainers are a key factor in driveway construction.
Laying the fine sand. A sheet of sand is setup on top of the gravel while a compressor is used to keep the platform compact. The compressor exposes places with thin sand and thus more sand is added to those identified spots. The sheet of sand is up-to a specified thickness.
Installing pavers. Either Brick, stone or concrete pavers are installed on your driveways with the required patterns to give your home a new impression. They are set with a plate compactor. Coarse sand is then swept into the joints until they are completely full.
This whole sieved process in meant to give you a hint of what will be going on outside your home. It will also help you keep track of it. Please give us a call via our office line or send us a mail so that we can negotiate on the terms of this project and provide you with the best deal. All this service is provided here in Rocklin, CA. Call (916) 473-4001 for cement contractor.